- Home
- All Products
- Adhesives
- ECO-PAC Adhesives
- PRO1 Power Bond Adhesive
PRO1 Power Bond Adhesive
Incredible strength and a replacement for mechanical fixings. This is the ultimate grab adhesive.
- General Details
- Technical Info
- Product Variations
- Documents
- Related Products
This is the ultimate high-performance grab adhesive. PRO1 can deliver a level of immediate grab strength that is typically double most other products on the market. Because of this using PRO1 can eliminate the need for costly temporary supports.
Featuring a special pre-cut nozzle to dispense an optimum bead width and shape, it’s the perfect companion for builders and shop fitters.
You can use Hippo PRO1 Power Bond on a wide range of adhesive projects, including fitting panels and elements during ceiling construction. Fixing heavy stone wall cladding elements. Gluing and fitting of high security glass, and general gap filling.
Key Features
- Incredible adhesive grab strength – replaces mechanical fixings.
- Stick virtually anything to anything.
- Will not stain materials
- Will not corrode metals
- Resistant to weather, extreme temperatures, mould & chemicals.
- Can be painted.
- Low pick-ability – perfect for high security areas.
- Does not contain solvents, isocyanates or phthalates.
- Available in ECO-PAC packaging.
Hippo ECO-PACs are aluminium foil sausages that replace traditional single use plastic cartridges. These strong durable packs are easy to use with no mess and contain less than 1% plastic. They’re much better for the environment because they generate 96% less waste volume.
As well as the environmental benefits, you also benefit financially. Because a 400ml ECO-PACs is priced to be better value for money than its smaller plastic cartridge equivalent.
Characteristics
Testing Standard | Result | |
---|---|---|
Curing System | By means of humidity | |
Components | 1 | |
Skin Formation | At 23ᴼC & 50% RH | 15 mins |
Curing | At 23ᴼC & 50% RH | 2,5 – 3mm / 24 h |
Density | 1,64 g/ml | |
Processing Temp | +5ᴼC to +40ᴼC | |
Shore A Hardness | ISO 868 – 3 seconds | 65 |
Modulus | ISO 8339 – 100% elongation | 1,70 N/mm² |
Elongation at Break | ISO 8339 | 160% |
Shearing Strength | Initial: 25 g/cm² After 4 hours: 8 kg/cm² After 1 week: 29 kg/cm² |
|
Tensile Strength | Initial: 600 g/cm² After 4 hours: 11 kg/cm² After 1 week: 24 kg/cm² |
|
Solvent & Isocyanate Content | 0% | |
Service Temp | -40ᴼC to +90ᴼC | |
Chemical Resistance | Excellent | |
UV Resistance | Excellent | |
Paint Compatibility | Water Based: Yes Solvent Based: Yes (Test compatibility) |
Limitations
Temporary supports are not normally needed. However for extremely heavy items support may still be required until the adhesive has dried.
Do not seal mirror edges/plastic sheeting until adhesive has cured.
When used for filling gaps in areas of high UV; some darkening / discolouration may occur. This does not affect the products performance.
Do not use on surfaces that bleed oils or plasticisers.
Not suitable for gluing PE, PP, PA or Teflon.
Not for use in aquarium manufacture.
Not for use in conjunction with bitumen or asphalt.
Not suitable for swimming pools containing chlorine or indoor swimming pools.
It is the user’s responsibility to determine suitability for use.
Product Code | Size | Colour | Barcode |
---|---|---|---|
H18508 | 290ml Cartridge | White | 5060084185081 |
H18559 | 400ml ECO-PAC | White | 5060084185093 |
Dual Barrelled Sealant Gun
Strong metal applicator gun for all types of sealant & adhesive products.
GRIPit No Nails Adhesive
An easy to use, solvent free adhesive that's a good alternative to nails.
PRO3 Adhesive, Sealant & Filler
Our flagship 3 in 1 solution. PRO3 replaces multiple products with just one tube thats capable of finishing off every job imaginable.