A highly versatile, multi-purpose sealant and construction adhesive. With permanent elasticity this is the ultimate sealant.
- General Details
- Technical Info
- Product Variations
- Custom Colours
- Related Products
PRO2 is the ultimate sealant. This is because it’s compatible with virtually all building materials, so users benefit from permanent adhesive elasticity everywhere.
It’s the perfect companion for plumbers, decorators and especially kitchen fitters. Because it’s certified as food safe, it can be used to seal joints in food preparation areas located in commercial kitchens. In fact its ideal for use on any job where flexibility is important.
With impressive levels of high grab strength, PRO2 can also be used as an adhesive. This makes it suitable for bonding a wide range of common building materials, as well has vertically fixing some heavy items without the need for temporary supports.
Ideal for finishing off a wide range of jobs including sealing sanitary joints in bathrooms and kitchens. Fitting and sealing heavy items like natural stone counter worktops. And attaching and sealing skirting boards, steps, protective profiles and prefab elements.
- Delivers permanent elasticity.
- Stick virtually anything to anything.
- Will not stain materials
- Will not corrode metals
- Certified food safe by iSEGA
- Works in the wet and dries underwater.
- +/- 25% joint movement.
- Resistant to weather, extreme temperatures, mould & chemicals.
- Can be painted.
- Does not contain solvents, isocyanates or phthalates.
- CE certified & tested.
- Available in custom colours.
- Available in ECO-PAC packaging.
New ECO-PACs are aluminium foil sausages that replace traditional single use plastic cartridges. These strong durable packs are easy to use with no mess and contain less than 1% plastic. They’re much better for the environment because they generate 96% less waste volume.
As well as the environmental benefits, you also benefit financially. Because a 400ml ECO-PACs is priced to be better value for money than its smaller plastic cartridge equivalent.
|Standard||White / Colours||Trans / Metallics|
|Curing System||By means of humidity||By means of humidity|
|Skin Formation||At 23ᴼC & 50% RH||40 minutes||12 mins|
|Curing||At 23ᴼC & 50% RH||2,5 – 3 mm after 24 h||2,5 – 3 mm after 24 h|
|Density||ISO 1183||1,48 g/ml||1,06 g/ml|
|Processing Temp||+5ᴼC to +40ᴼC||+5ᴼC to +40ᴼC|
|Shore A Hardness||ISO 868 – 3 seconds||40||35|
|Joint Movement Capacity||ISO 11600||25%||12.5%|
|Modulus||ISO 8339 – 100% elongation||0,80 N/mm²||0,70 N/mm²|
|Elongation at Break||ISO 8339||230%||150%|
|Modulus at Break||ISO 8339||1,10 N/mm²||0,80 N/mm²|
|Water Vapour Permeability||ISO 15106||µ = 6946; sd = 4,9m|
|Solvent & Isocyanate Content||0%||0%|
|Service Temp||-40ᴼC to +90ᴼC||-40ᴼC to +90ᴼC|
|Paint Compatibility||Water Based: Yes
Solvent Based: Yes (Test compatibility)
|Water Based: Yes
Solvent Based: Yes (Test compatibility)
For overhead applications, always use in conjunction with mechanical fixings.
Use in conjunction with mechanical fixings for large, heavy mirrors. For other heavier items temporary support may be required until the adhesive has dried.
Do not seal mirror edges/plastic sheeting until adhesive has cured.
Do not use on surfaces that bleed oils or plasticisers.
Not for use as part of a structural glazing system, in aquarium manufacture or in conjunction with bitumen or asphalt.
When the colour white is used and there is limited natural light, yellowing can occur over time in predominantly dark conditions. This does not affect the products performance.
It is the user’s responsibility to determine suitability for use.
|H18541||290ml Cartridge||Natural Stone||5060084185418|
Special Colour Palette
Available from our partner network of decorators and builders merchants. These can normally be supplied by special order within 24 hours.
Minimum Order Qty – Special Colours
290ml Cartridge x1
|H18585||290ml Cartridge||Bronze (Metallic)||N/A||N/A|
|H18586||290ml Cartridge||Silver (Metallic)||N/A||N/A|
|H18587||290ml Cartridge||Gold (Metallic)||N/A||N/A|
|H18588||290ml Cartridge||Platinum (Metallic)||N/A||N/A|
|H18590||290ml Cartridge||Light Brown||8007||N/A|
|H18591||290ml Cartridge||Dark Brown||8016||N/A|
|H18593||290ml Cartridge||Concrete Grey||7023||N/A|
|H18594||290ml Cartridge||Cement Grey||N/A||N/A|
|H18595||290ml Cartridge||Dark Grey||7005||N/A|
Additionally we can supply PRO2 to match any bespoke RAL colour. Lead times will be confirmed at point of order.
Minimum Order Qty – Bespoke Colours
290ml Cartridge x75
400ml ECO-PAC x600